Home Product Index HVAC Index Order Items Catalog F.A.Q. Contact Info Directions Customers Site Map

Gas Down-Flow Furnaces

by Revolv®

Please choose from the following or scroll down the page: Features and Benefits
Gas Furnaces for 3 Ton Units

Gas Furnaces for 3.5-4 Ton Units


Roof Jacks

Electric Furnaces

The RG1 Series furnace is designed for all sizes of manufactured homes, incorporating high efficiency, reliability and low maintenance. Furnaces may be installed free-standing in a utility room, or enclosed in an alcove or closet (Vented doors are highly recommended).

To determine the proper heating and air conditioning capacities for your home, go here to calculate. You will need some basic information about your home to use this application.

Click any part number to order!
Due to 2015 Federal Energy Efficiency changes, different regions of the country have different minimum energy efficiency standards for HVAC. Our 14 SEER equipment meets or exceeds the minimum standards in all regions.

Our Gas Furnaces are shipped by freight.

 

Features and Benefits:



*80% +AFUE Manufactured Housing Gas Furnaces are A/C ready for up to 4 tons
*Built-in Coil Cabinet (larger furnaces require cabinet installation onsite)
*Sealed combustion- vents exhaust gases directly outdoors and draws in outside fresh air for combustion.
*Modern hot surface ignition- no pilot lights to blow out
*Low maintenance- sealed bearings on motors, reliable controls and burners
*Appliance quality- metal door with baked enamel.

A- Air-conditioner ready models have blowers capable of handling up to 4 tons of air conditioning
B- Sealed combustion design draws in combustion air directly from outside, providing quiet operation while increasing operation efficiency and reducing cold drafts.
C- Built-in coil cabinet is design matched to work in conjunction with Revolv heat pumps and air-conditioners, providing ease of installation and highly efficient operation performance.

For more information about our line of gas furnaces please go here.

↑ Dimensions for furnaces for 3 ton units (For furnaces for 3.5- 4 ton furnaces add 6" to the height)

Pre-painted contoured white lower panels provides an attractive, scratch resistant, easy to clean appliance finish

Gas Furnaces for 3 Ton Units
51RG1D56C3- Gas Furnace for 3 ton AC Unit
(80 A.F.U.E./56K BTU input)- $1,026.50 each

Shipping and handling estimates: 1 unit by freight- $275.00

See bottom of this page for more shipping details.

Click on the part number to order!

51RG1D70C3- Gas Furnace for 3 ton AC Unit
(80 A.F.U.E./70K BTU input)- $1,085.80 each

Shipping and handling estimates: 1 unit by freight- $275.00

See bottom of this page for more shipping details.

Click on the part number to order!

51RG1D77C3- Gas Furnace for 3 ton AC Unit
(80 A.F.U.E./77K BTU input)- $1,114.92 each

Shipping and handling estimates: 1 unit by freight- $275.00

See bottom of this page for more shipping details.

Click on the part number to order!


Gas Furnaces for 3.5- 4 Ton Units
(Coil cabinets for these units are shipped separately and require assembly onsite)
51RG1D56N4- Gas Furnace for 3.5- 4 ton AC Units
(80 A.F.U.E./56 K BTU input)- $1,254.73 each

Shipping and handling estimates: 1 unit by freight- $275.00

See bottom of this page for more shipping details.

Click on the part number to order!

51RG1D70N4- Gas Furnace for 3.5- 4 ton AC Units
(80 A.F.U.E./70 K BTU input)- $1,279.29 each

Shipping and handling estimates: 1 unit by freight- $275.00

See bottom of this page for more shipping details.

Click on the part number to order!

51RG1D77N4- Gas Furnace for 3.5- 4 ton AC Units
(80 A.F.U.E./77 K BTU input)- $1,346.29 each

Shipping and handling estimates: 1 unit by freight- $275.00

See bottom of this page for more shipping details.

Click on the part number to order!


Roof Jacks
51RG1903665A- Roof Jack- 35" to 63" Length- $244.78 each

 

Shipping and handling estimates: 1 unit by parcel if ordered alone- $75.00

 

Click on the part number to order!

*Our Roof Jacks are for Revolv furnaces only and are for 4/12 pitch only.

 

 

Measure from top of furnace unit to the roof line to determine proper roof jack.

51RG1903666A- Roof Jack- 51" to 95" Length- $360.53 each

 

Shipping and handling estimates: 1 unit by parcel if ordered alone- $75.00.

 

Click on the part number to order!

*Our Roof Jacks are for Revolv furnaces only and are for 4/12 pitch only.

 

 

Measure from top of furnace unit to the roof line to determine proper roof jack.

Related Items

Electric Furnaces

A-Coils

Coil Shelf Kits

Thermostats

Shipping note on air conditioners and furnaces

Because of weight and fragility, these items must be shipped on a pallet, and therefore may require an extra lift-gate service over and above the normal rate of shipping when going to a residence or a business without a dock. Please contact us concerning the cheapest way to ship these items. If you live in the Dallas- Fort Worth area we would be happy to delivery them to you on our own truck for a nominal charge (usually around $45),

or you are welcome to come and pick them up for no delivery charge at all!

*Shipping/handling and taxes are not included in the price of the item. *S/H- Shipping/Handling estimates are based on a single shipment (one item ordered) to most residences in the 48 contiguous United States. We can and will combine shipping whenever possible to give you the most economical shipping rate.

Shipping rates will be higher for more expedited shipments.  

Please e-mail us for more information about your order, and don't forget to mention the part numbers!

"Serving You Best"
Please order by part number!

Home Product Index HVAC Index Order Items Catalog F.A.Q. Contact Info Directions Customers Site Map